Painting wrought iron gates is very different and a much more difficult job than painting most other surfaces including furniture and walls. Wrought iron brings a host of problems with it, but if you can keep it always shining and refreshed, it is also one of the best types of gates out there in terms of pure appearance. Let’s look at the best paint for wrought iron gates.
Rust-Oleum Protective Enamel Review
This oil-based protective enamel spreads easily and is easy to apply. It can be used on any metal, including iron railings. Painting on wrought iron has never been this easy!
The Rust-Oleum Protective Enamel is a great liquid plastic cover. Just sand any rusted gate or railing and apply this paint after a coat of primer. Extremely easy and hassle-free, the Rust-Oleum Protective Enamel is a no-mess product to paint over rusted wrought iron surfaces.
All in all, we would go on to say that Rust-Oleum Protective Enamel is the perfect option when it comes to painting rusted wrought iron surfaces such as gates and railings.
Steps to painting a wrought iron gate
Here is a step-by-step breakdown of painting wrought iron gates safely, reliably, and without any mess.
1. Remove rust
The first step is of course rust removal. Use sandpaper and sand the surface to be painted thoroughly.
2. Rinse the surface
After getting rid of all the rust from the surface, it is now time to rinse it to clean off any debris. Let the surface dry now.
3. Apply multiple coats
Apply multiple coats of a thinner and then the paint on the surface, covering it completely. Make sure no region has thicker paint. And that’s it, you are done! Let the paint dry to touch in the wind.
Frequently Asked Questions
Let’s go over some common questions you might have.
Using two light coats (compared to one heavy coat) of wrought iron paint, like the one we reviewed, is the best way. Using exterior paint is not recommended because of imminent chipping.
A gloss sheen or semi-gloss is the most popular paint for wrought iron gates.
Most people go for a brown, antique finish but it’s not uncommon to have white finished gates or railings.
It’s a simple three-step process: sand the surface, rinse it, and then apply multiple coatings of thinner and paint.